On-line version ISSN 1816-7950
South African coal fly ash (SACFA) was used to effectively remove phenol, 2-nitrophenol and 4-nitrophenol from wastewater. The rate of adsorption follows first-order kinetics before attaining equilibrium with the sorption rate (Kad) obtained being the highest for 4-nitrophenol (p-nitrophenol) (7.0 x 103/h), followed by phenol (1.2 x 103/h) and 2-nitrophenol (o-nitrophenol) (1.0 x 103/h). Batch studies were performed to evaluate the adsorption process, and it was found that the Freundlich isotherm effectively fits the experimental data for the adsorbates better than the Langmuir model, with the fly ash having the highest adsorption capacity of 6.51 X 10-2 mg/g for 4-nitrophenol, 6.00 x 10-2 mg/g for 2-nitrophenol and 6.31 x10-2 mg/g for phenol. The fly ash was found to adsorb 90.2% of phenol, 88.9% of 2-nitrophenol and 92.6% of 4-nitrophenol at an initial concentration of 20 mg/ℓ. The desorption studies suggested that the desorption of 4-nitrophenol was the most difficult of the three adsorbates to be desorbed. The desorption efficiency was 17.9% for phenol, 18.8% for 2-nitrophenol and 10.2% for 4-nitrophenol. This work proved that SACFA can be used as an efficient adsorbent material for removal of phenol from water and wastewater.
Keywords : fly ash; phenol; nitrophenols; adsorption-desorption; batch study.