SciELO - Scientific Electronic Library Online

 
vol.25 número2A PV power supply module for a portable Cubesat satellite ground stationVoltage stability enhancement using an adaptive hysteresis controlled variable speed wind turbine driven EESG with MPPT índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Journal of Energy in Southern Africa

versão On-line ISSN 2413-3051
versão impressa ISSN 1021-447X

Resumo

ELOKA-EBOKA, Andrew C; IGBUM, Ogbene Gillian  e  INAMBAO, Freddie L. Optimization and effects of process variables on the production and properties of methyl ester biodiesel. J. energy South. Afr. [online]. 2014, vol.25, n.2, pp.39-47. ISSN 2413-3051.

Optimization of the production process in biodiesel production holds huge prospects. A reduced cost option is the optimization of process variables that affect yields and purity of biodiesel, which was achieved in this study. Optimized production and direct effects of process variables on the production and quality of methyl ester biodiesel fuels from the non-edible seed oils of sandbox seed was carried out. Catalyst nature and concentration, alcohol to triglyceride molar ratio, mixing speed, reaction time and temperature were taken into consideration as variables to their individual response on the yields, viscosity and specific gravity of the methyl esters produced. These are specific indispensable properties of biodiesel for use in compression ignition engines. Optimized concentrations were 0.3 to 1.5% w/v and two mole ratios of 3:1 and 6:1. Time of reaction was varied (5mins to 30mins) with temperatures (38oC and 55oC). Also, the effect of methanol in the range of 4:1and 6:1 (molar ratio) was investigated, keeping catalyst type, reaction time and temperatures constant. The effects of KOH and NaOH on the transesterification were investigated with concentration kept constant at 1%. The general response in this study was that at optimized rate of agitation (800rpm), optimized reaction time was as low as 5minutes, 1% catalyst concentration of NaOH was the optimal concentration, and 55oC was the optimal temperature with attendant high yields. However, there are variations with the nature of feedstock as the work further exposed. These high points are particularly of interest to guide against process backdrop.

Palavras-chave : optimization; process variables; effects; methyl esters; production; sandbox seed oil.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons