SciELO - Scientific Electronic Library Online

 
vol.62 issue2Laboratory and field investigations in granular soils to correlate relative density, relative compaction and grain sizeWarrants for roundabouts and other traffic control devices author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

Related links

  • On index processCited by Google
  • On index processSimilars in Google

Share


Journal of the South African Institution of Civil Engineering

On-line version ISSN 2309-8775
Print version ISSN 1021-2019

Abstract

FOUCHE, N. The liquefaction potential of the upper quaternary sands of the Cape Flats, Western Cape, South Africa. J. S. Afr. Inst. Civ. Eng. [online]. 2020, vol.62, n.2, pp.22-30. ISSN 2309-8775.  http://dx.doi.org/10.17159/2309-8775/2020/v62n2a3.

Liquefaction of saturated cohesionless soils as a result of earthquake-induced ground shaking is a major concern for structures constructed within or on these soils. During an earthquake, shear waves propagate through the ground, generating shear stresses and strains that are cyclic in nature, causing the soil grains to rearrange into a denser state of packing. This process is too rapid for drainage to occur, which results in an increase in pore water pressure and a decrease in effective stress and shear resistance of the soil. The occurrence of a seismic event associated with the Milnerton Fault line extending below the Cape Flats, a low-lying sand-covered area connecting the Cape Peninsula with the southwestern Cape mainland of South Africa, can cause extensive damage to the largely inadequate infrastructure characterising the area. To evaluate the susceptibility of Cape Flats sand to undergo liquefaction during and after a seismic event, the empirical SPT-based method put forth by Idriss & Boulanger (2004) was used to assess the cyclic liquefaction potential of dense, dilative sands, whereas the CPT-based method published by Robertson (2016) was used to assess the volumetric response of the sands during undrained shear. Resistance of the Cape Flats sands to liquefy at probable earthquake moment magnitude and acceleration values of M = 6.0 and amax= 0.15 g respectively, was noted. Robertson's normalised Soil Behaviour Type (SBTn) chart revealed mostly dilative sands and silty sands susceptible to cyclic liquefaction. Loose, contractive sands prone to flow liquefaction are present, although limited in occurrence and extent.

Keywords : Cape Flats sand; cyclic liquefaction; flow liquefaction; standard penetration test; cone penetration test.

        · text in English     · English ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License