SciELO - Scientific Electronic Library Online

vol.57 número2Using small-strain stiffness to predict the load-settlement behaviour of shallow foundations on sandAdjudication in South African construction industry practice: Towards legislative intervention índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados



Links relacionados

  • En proceso de indezaciónCitado por Google
  • En proceso de indezaciónSimilares en Google


Journal of the South African Institution of Civil Engineering

versión On-line ISSN 2309-8775
versión impresa ISSN 1021-2019


STOTT, P R  y  THERON, E. Some shortcomings in the standard South African testing procedures for assessing heaving clay. J. S. Afr. Inst. Civ. Eng. [online]. 2015, vol.57, n.2, pp.36-44. ISSN 2309-8775.

Design of foundations for most light structures in South Africa, and in particular for low-cost housing, relies heavily on particle size analysis and the determination of Atterberg Limits. The tests for these properties are currently performed in commercial materials testing laboratories using the procedures of the CSIR's Technical Methods for Highways Part 1 (TMH1) (CSIR 1986). SANS 3001 (SANS 2011) is being phased in to replace TMH1. Both are primarily concerned with road construction. Investigations at the Central University of Technology indicate serious shortcomings in both of these norms in the context of foundation design for light structures. Highly plastic material is not usually used as road construction material, and these methods may be adequate to simply identify material so plastic that they should not be used in road construction. Structural foundations, particularly for low-cost housing, do not usually have this option; it is essential to estimate the actual heave potential. This investigation suggests that some of the changes proposed in SANS 3001 may be beneficial for heave assessment, but the most likely application of SANS 3001 could be unsatisfactory in many cases.

Palabras clave : expansive clay; TMH methods; SANS 3001; liquid limit; plasticity index; linear shrinkage.

        · texto en Inglés     · Inglés ( pdf )


Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons