Journal of the South African Institution of Civil Engineering
versión On-line ISSN 2309-8775
versión impresa ISSN 1021-2019
DUNDU, M. Buckling of short cold-formed lipped channels in compression. J. S. Afr. Inst. Civ. Eng. [online]. 2014, vol.56, n.2, pp.46-53. ISSN 2309-8775.
ABSTRACT This paper presents an experimental investigation of short cold-formed lipped channel columns compressed between pinned ends. The short columns are subjected to pure axial compressive loading. Twelve column specimens are tested and the columns are categorised into three groups, depending on the length and thickness. The buckling modes of failure that occurred include local buckling and distortional buckling. A comparison of the experimental results with the loads predicted by the South African standard for the design of cold-formed steelwork (SANS 10162-2) shows that the code is not conservative enough to cater for these columns.
Palabras clave : cold-formed lipped channels; short columns; compressive resistance; local buckling; distortional buckling.