SciELO - Scientific Electronic Library Online

vol.55 número1Optimising dosage of Lytag used as coarse aggregate in lightweight aggregate concretes2D Linear Galerkin finite volume analysis of thermal stresses during sequential layer settings of mass concrete considering contact interface and variations of material properties. Part 1: Thermal analysis índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados



Links relacionados

  • En proceso de indezaciónCitado por Google
  • En proceso de indezaciónSimilares en Google


Journal of the South African Institution of Civil Engineering

versión On-line ISSN 2309-8775
versión impresa ISSN 1021-2019


JACOBSZ, S W. Centrifuge modelling of a soil nail retaining wall. J. S. Afr. Inst. Civ. Eng. [online]. 2013, vol.55, n.1, pp.85-93. ISSN 2309-8775.

This paper describes a physical model of a soil nail retained excavation face which was tested in the new geotechnical centrifuge at the University of Pretoria. As centrifuge modelling is new in South Africa, a short introduction to this technique is presented. The mobilisation of soil nail forces and their maximum values in response to excavation in the model were compared to measurements recently made in an instrumented 10 m high soil nail retaining structure for the Gautrain system in Pretoria. Results were also compared to predictions made using a simple failure wedge analysis and a database of eleven full-scale instrumented soil nail walls from the literature. The centrifuge model data compared well with both full-scale situations and theoretical analyses. The results suggest that soil nail forces measured in the centrifuge are conservative due to the mobilisation of a portion of the shear strength of the model soil during the acceleration of the centrifuge, leaving less un-mobilised shear strength available to resist loads resulting from the excavation.

Palabras clave : soil nail; centrifuge model; strength mobilisation; sand; residual andesite.

        · texto en Inglés     · Inglés ( pdf )


Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons