SciELO - Scientific Electronic Library Online

 
vol.55 issue1Partial factors for selected reinforced concrete members: background to a revisionof SANS 10100-1 author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

Related links

  • On index processCited by Google
  • On index processSimilars in Google

Share


Journal of the South African Institution of Civil Engineering

On-line version ISSN 2309-8775
Print version ISSN 1021-2019

Abstract

JACOBSZ, S W. Centrifuge modelling of a soil nail retaining wall. J. S. Afr. Inst. Civ. Eng. [online]. 2013, vol.55, n.1, pp.85-93. ISSN 2309-8775.

This paper describes a physical model of a soil nail retained excavation face which was tested in the new geotechnical centrifuge at the University of Pretoria. As centrifuge modelling is new in South Africa, a short introduction to this technique is presented. The mobilisation of soil nail forces and their maximum values in response to excavation in the model were compared to measurements recently made in an instrumented 10 m high soil nail retaining structure for the Gautrain system in Pretoria. Results were also compared to predictions made using a simple failure wedge analysis and a database of eleven full-scale instrumented soil nail walls from the literature. The centrifuge model data compared well with both full-scale situations and theoretical analyses. The results suggest that soil nail forces measured in the centrifuge are conservative due to the mobilisation of a portion of the shear strength of the model soil during the acceleration of the centrifuge, leaving less un-mobilised shear strength available to resist loads resulting from the excavation.

Keywords : soil nail; centrifuge model; strength mobilisation; sand; residual andesite.

        · text in English     · English ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License