SciELO - Scientific Electronic Library Online

 
vol.53 número2Climate change and urban road transport - a South African case study of vulnerability due to sea level riseBehaviour of steel tubular stub and slender columns filled with concrete using recycled aggregates índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

    Links relacionados

    • En proceso de indezaciónCitado por Google
    • En proceso de indezaciónSimilares en Google

    Bookmark

    Journal of the South African Institution of Civil Engineering

    versión impresa ISSN 1021-2019

    Resumen

    FANOURAKIS, G C. Validation of international concrete creep prediction models by application to South African concretes. J. S. Afr. Inst. Civ. Eng. [online]. 2011, vol.53, n.2, pp. 23-30. ISSN 1021-2019.

    Creep deformation of concrete is often responsible for excessive deflections at service loads which can compromise the performance of a structure. National design codes therefore provide prediction models for the estimation of creep deformation. These models are empirical-based. This paper assesses the accuracy of six international code type models, when compared with the actual strains measured on a range of South African concretes under laboratory control conditions. The models considered are those contained in AS 3600 (2001), AS 3600 (2009), Eurocode EC 2 (2004), GL (2000), GL (2004) and GZ (1993). The results indicate that for the range of concretes tested, the GL (2000) model yielded the most accurate predictions, giving the lowest overall coefficient of variation (ωall) of 31,9%. The least accurate method was the AS 3600 (2009) which yielded an overall coefficient of variation (ωall) of 74,7%. This paper also recommends a new approach to assessing the accuracy of creep models.

    Palabras llave : concrete; creep; models; design codes; testing.

            · texto en Inglés     · pdf en Inglés