SciELO - Scientific Electronic Library Online

 
vol.68Simultaneous multi-element electrothermal atomic absorption determination using a low resolution CCD spectrometer and continuum light source: The concept and methodologyA DFT and NBO analysis of the bonding in titanocenyl complexes containing a five-membered L,L'-cyclic ligand: L,L' = O,O'; S,S' or Se,Se' índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • En proceso de indezaciónSimilares en Google

Compartir


South African Journal of Chemistry

versión On-line ISSN 1996-840X
versión impresa ISSN 0379-4350

Resumen

TAVENGWA, Nikita Tawanda; CUKROWSKA, Ewa  y  CHIMUKA, Luke. Selective adsorption of uranium (VI) on NaHCO3 leached composite γ-Methacryloxypropyltrimethoxysilane coated magnetic Ion-imprinted polymers prepared by precipitation polymerization. S.Afr.j.chem. (Online) [online]. 2015, vol.68, pp.61-68. ISSN 1996-840X.  http://dx.doi.org/10.17159/0379-4350/2015/v68a10.

Ion imprinted nano-magnetic composite polymers for selective removal of hexavalent uranium were prepared by a precipitation polymerization technique in the presence of γ-methacryloxypropyltrimethoxysilane (γ-MPS) coated magnetite and other pre-polymerization reagents. The synthesized magnetic polymers were then leached with NaHCO3 to produce magnetic ion imprinted polymers (IIPs) with fabricated adsorption sites complementary to the uranyl ions in terms of size and shape. Several parameters were investigated to obtain conditions which gave the optimum adsorption of the uranyl onto the magnetic IIPs and their corresponding controls, magnetic ion non-imprinted polymers (NIPs). The optimum amount of magnetic sorbent, initial concentration and contact time were 50 mg, 2.5 mg L-1 and 45 min, respectively. The adsorption capacity of the magnetic IIP (1.15 ± 0.01 mg g-1) was higher than that of the magnetic NIP (0.93 ± 0.02 mg g-1). This indicated that the former had a somewhat higher affinity for U(VI) than the later. The magnetic polymers also displayed good selectivity of the order: U(VI) > Ni(II) > Mg(II). After six cycles of use, the magnetic polymers illustrated good stability and reusability.

Palabras clave : Complex matrices; magnetic ion imprinted polymers; precipitation; selectivity; uranium.

        · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons