SciELO - Scientific Electronic Library Online

 
vol.47 número6Molecular cloning, sequence analysis and tissue expression of bovine imprinted ASCL2 geneEffect of freezer storage on quality of M. longissimus lumborum from fallow deer (Dama dama L.) índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Em processo de indexaçãoSimilares em Google

Compartilhar


South African Journal of Animal Science

versão On-line ISSN 2221-4062
versão impressa ISSN 0375-1589

Resumo

QUISPE, M. D. et al. Development and preliminary validation of an automatic digital analysis system for animal fibre analysis. S. Afr. j. anim. sci. [online]. 2017, vol.47, n.6, pp.822-833. ISSN 2221-4062.  http://dx.doi.org/10.4314/sajas.v47i6.10.

New equipment was designed and developed to evaluate the physical characteristics of animal fibres, based on an automatic digital analysis system (ADAS) that allows the capture of a series of real-time images. In the development of the mechanical component, a design tool was used that allows visualization, simulation, and documentation of the product. At the same time, an Atmel (ATmega328) microcontroller was programmed to enable displacement of table coordinates, focus of images, and reading of the temperature and humidity of fibre samples and the environment. The fibre images were processed using artificial vision technology. Algorithms were also developed for edge detection to define the diameter of the fibre in pixels. Finally, calibration was carried out using a regression and standardized samples of wool tops. The authors then weighted the pixels to µm with a standard sample. A friendly graphical interface was developed for management of the built equipment, visualization of results, calibration, data and graphic export, configuration, among others. For validation, average fibre diameter (AFD), standard deviation (SD), coefficient of variation and comfort factor (CF) were compared with values of top wool patterns. Finally, the measurements of OFDA 2000 and FIBER-EC were compared using student t-test and Pearson correlation. The results of the validation showed that the confidence limit of FIBER-EC, which varied between 0.075 and 3.47 µm, is similar to that of the confidence limit of Sirolan Laserscan and OFDA 2000. Accuracy is better than the OFDA 2000 for fibre assessments less than 25 µm, which vary between 0.034 and 0.250 µm.

Palavras-chave : Accuracy; image digital processing; precision; technological; traits; wool.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons