SciELO - Scientific Electronic Library Online

vol.115 número5Equipment selection based on the AHP and Yager's methodHydraulic support instability mechanism and its control in a fully-mechanized steep coal seam working face with large mining height índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados



Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Em processo de indexaçãoSimilares em Google


Journal of the Southern African Institute of Mining and Metallurgy

versão On-line ISSN 2411-9717
versão impressa ISSN 0038-223X


ANDERSEN, N.. Pre-sink shaft safety analysis using wireline geophysics. J. S. Afr. Inst. Min. Metall. [online]. 2015, vol.115, n.5, pp.435-439. ISSN 2411-9717.

During the preliminary design phases and feasibility study of a proposed vertical shaft, a vertical diamond drill-hole is normally drilled on the site. This paper outlines how rock mass characteristics, in-situ rock stress, rock strength, hydrological characteristics, and structural parameters can be determined using wireline logging of this borehole. In addition, a rock mass classification scheme is developed, based on published work, and in particular the Q-factor is adapted to assess the stability of raise-bored shafts. The 'stick plot' is introduced, which combines all geotechnical parameters applicable to the stability of a vertical shaft into a colour-coded format where cross-correlations can readily be made on a day-today basis during the shaft-sinking process.

Palavras-chave : shaft-sinking; raise-boring; geophysical logging; geotechnical; Q-factor; stability.

        · texto em Inglês     · Inglês ( pdf )


Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons