SciELO - Scientific Electronic Library Online

 
vol.115 número3Utilization of the Brazilian test for estimating the uniaxial compressive strength and shear strength parametersChemical wear analysis of a tap-hole on a SiMn production furnace índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Journal of the Southern African Institute of Mining and Metallurgy

versão On-line ISSN 2411-9717
versão impressa ISSN 0038-223X

Resumo

PITYANA, S.L.; CAMAGU, S.T.  e  DUTTA MAJUMDAR, J.. Laser surface alloying of Al with Cu and Mo powders. J. S. Afr. Inst. Min. Metall. [online]. 2015, vol.115, n.3, pp.193-198. ISSN 2411-9717.

Laser surface alloying was used to develop copper and molybdenum aluminides by injecting premixed copper and molybdenum powder particles into a laser-generated melt pool on an aluminium substrate. Different laser processing parameters were used to produce the composite thin layers on the substrate material. The microstructure and phase constituents of the composite layer were studied by means of scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD) techniques. Experimental results show that the matrix structure of the metal matrix composite layer consists of θ-CuAl2 and MoAl5. Surface hardness was increased by a factor of 3.

Palavras-chave : laser surface alloying; metal matrix composites; intermetallic phases.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons