SciELO - Scientific Electronic Library Online

 
vol.114 número6A new process for the recovery of iron, vanadium, and titanium from vanadium titanomagnetiteLife-of-mine ventilation and refrigeration planning for Resolution Copper Mine índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • En proceso de indezaciónSimilares en Google

Compartir


Journal of the Southern African Institute of Mining and Metallurgy

versión On-line ISSN 2411-9717
versión impresa ISSN 0038-223X

Resumen

DONG, H; WANG, H.-J  y  CHU, S.-J. A methodology for determining the erosion profile of the freeze lining in submerged arc furnace. J. S. Afr. Inst. Min. Metall. [online]. 2014, vol.114, n.6, pp.489-496. ISSN 2411-9717.

This paper presents a heat conduction model to determine the erosion profile of freeze linings in a ferronickel submerged arc furnace. Kirchhoff transformation was adopted to simplify the nonlinear equation governing heat conduction. The boundary element method (BEM) and Nelder-Mead simplex optimization method were employed to solve an inverse heat conduction problem. Erosion profiles could be obtained when calculated temperatures at sensor locations agreed well with measured temperatures. The model was validated by comparing the heat loss through the linings, which was calculated by BEM and integral operation after erosion profiles were obtained, with the value calculated from industrial data such as actual power consumption, tap-to-tap time, and ferronickel output. The optimal solution for the erosion profile could be acquired when the difference in heat losses calculated by these two methods is at a minimum.

Palabras clave : submerged arc furnace; freeze lining; erosion profile; boundary element method.

        · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons