SciELO - Scientific Electronic Library Online

 
vol.113 número5The recovery of copper from a pregnant sulphuric acid bioleach solution with developmental resin Dow XUS43605Selenium impurity in sodium sulphate decahydrate formed by eutectic freeze crystallization of industrial waste brine índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Journal of the Southern African Institute of Mining and Metallurgy

versão On-line ISSN 2411-9717

Resumo

CHAPMAN, N.A.; SHACKLETON, N.J.; MALYSIAK, V.  e  O'CONNOR, C.T.. Comparative study of the use of HPGR and conventional wet and dry grinding methods on the flotation of base metal sulphides and PGMs. J. S. Afr. Inst. Min. Metall. [online]. 2013, vol.113, n.5, pp. 407-413. ISSN 2411-9717.

The effect of using conventional crushing and HPGR in combination with dry or wet milling was investigated using a base metal sulphide (sphalerite), and a PGM (platinum group minerals) ore in order to determine how these different processes affect the flotation performance. In the case of sphalerite, irrespective of the crushing procedure (HPGR or conventional), dry milling resulted in the highest grades and recoveries of zinc. Conversely, in the case of PGMs, a similar treatment produced the poorest results. The results were investigated further by comparing the relative effects of factors such as percentage liberation, particle size, and surface properties of the samples produced by the different milling procedures as well as the concentrates and tailings obtained from the flotation tests.

Palavras-chave : HPGR; grinding; flotation; sulphides; PGMs.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License