SciELO - Scientific Electronic Library Online

 
vol.113 issue4Continuous blasting improvements at Landau CollieryOptimization of diesel usage at Uitvlugt Mine author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Journal of the Southern African Institute of Mining and Metallurgy

On-line version ISSN 2411-9717

Abstract

KOLOKOTO, T.J.  and  YILMAZ, H.. An investigation into introducing a new support element at Khomanani 2: resin bolts or 1.5 m in-stope roofbolts. J. S. Afr. Inst. Min. Metall. [online]. 2013, vol.113, n.4, pp. 335-344. ISSN 2411-9717.

This paper is based on a project conducted at Khomanani 2 shaft, Anglo American Platinum Limited. The main objective was to find an alternative support element in stopes to address the falls of ground (FOG) problem experienced at this shaft. Literature review was the major method used in the investigations. Resin bolts or any 1.5 m in-stope roofbolts were considered. The shaft was making use of 0.9 m long friction bolts, and these could not prevent the FOG experienced. Observations indicated that the FOG resulted in fallout thicknesses averaging to 1.1 m, which is greater than the supported length of the friction bolts. The implementation of 1.5 m long bolts was recommended as a result of the project. These bolts will be able to address the fall-out thickness and provide sufficient support resistance to mitigate FOG. The chosen support element will result in a relatively small increase in support costs.

Keywords : ground support; in-stope support; resin bolt; friction bolt.

        · text in English     · English ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License