SciELO - Scientific Electronic Library Online

vol.113 número2Effect of dual phase microstructure on the toughness of a Cr-Mo low-alloy plate steelA study of metal dusting corrosion on Fe- and Ni-based alloys índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados



Links relacionados

  • En proceso de indezaciónCitado por Google
  • En proceso de indezaciónSimilares en Google


Journal of the Southern African Institute of Mining and Metallurgy

versión On-line ISSN 2411-9717
versión impresa ISSN 0038-223X


MARUMA, M.G.; SIYASIYA, C.W.  y  STUMPF, W.E.. Effect of cold reduction and annealing temperature on texture evolution of AISI 441 ferritic stainless steel. J. S. Afr. Inst. Min. Metall. [online]. 2013, vol.113, n.2, pp.115-120. ISSN 2411-9717.

The effect of the amount of cold reduction and annealing temperature on the evolution of the texture of AISI 441 steel is reported. The steel was cold rolled by 62%, 78%, and 82%, followed by isothermal annealing of each sample at 900°C, 950°C, and 1025°C for 3 minutes. The crystallographic texture was determined by Phillips X'Pert PRO MPD texture diffractrometer. Microstructures were characterized using optical microscopy and scanning electron microscopy (SEM). The results show that sample that received 78% cold reduction and annealing at 1025°C presented the highest Rm-value and lowest ΔR-value, which would enhance its deep-drawing capability. In addition, this sample showed the highest intensity of shifted γ-fibre, notably {554}<225> and {334}<483>. It can therefore be concluded that the γ-fibre, which favours deep drawing, is optimal after 78% cold reduction and annealing at 1025°C.

Palabras clave : ferritic stainless steel; texture; XRD.

        · texto en Inglés     · Inglés ( pdf )


Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons