SciELO - Scientific Electronic Library Online

 
vol.113 número2The effect of the matrix structure on the metal dusting rate in hydrocarbon environmentsA comparative assessment of Ti-47.5 at.%Al cathodically modified by precious metal addition índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • En proceso de indezaciónSimilares en Google

Compartir


Journal of the Southern African Institute of Mining and Metallurgy

versión On-line ISSN 2411-9717
versión impresa ISSN 0038-223X

Resumen

ANNAN, K.A.; SIYASIYA, C.W.  y  STUMPF, W.E.. Effect of hot rolling conditions on ridging in 16wt% Cr ferritic stainless steel sheet. J. S. Afr. Inst. Min. Metall. [online]. 2013, vol.113, n.2, pp.91-96. ISSN 2411-9717.

The last seven hot rolling passes of the ferritic stainless steel AISI 430 were simulated on a Gleeble-1500D® thermo-mechanical simulator to investigate the effect of temperature, strain rate, and interpass time on the texture. The compression tests were carried out over a wide range of strain rates (0.1 s-1 to 5 s-1) and temperatures (1100°C to 820°C) with different interpass times (2, 10, 20, and 30 seconds). The dynamic recrystallization to dynamic recovery transition temperature was determined from examining the relationship between the mean flow stress and the inverse of the deformation temperature in multi-pass tests. It was found that the texture in the central layer of the compressed sample is a strong recrystallization-type. The through-thickness textural and microstructural banding, to a large extent, were found to be weakened by hot deformation in the two-phase (α + γ) region, as opposed to the single-phase (α) region.

Palabras clave : ferritic stainless steel; electron backscattering diffraction (EBSD); hot rolling; dynamic recovery; dynamic recrystallization.

        · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons