SciELO - Scientific Electronic Library Online

 
vol.111 issue5Project solution for land reclamation and spatial arrangement of the 'Srebro' open pit mine at the Fruška Gora National Park author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Journal of the Southern African Institute of Mining and Metallurgy

On-line version ISSN 2411-9717

Abstract

MUHLARE, T.A.  and  GROOT, D.R.. The effect of electrolyte additives on cathode surface quality during copper electrorefining. J. S. Afr. Inst. Min. Metall. [online]. 2011, vol.111, n.5, pp. 371-378. ISSN 2411-9717.

The use of electrolyte additives to smoothen cathode deposits during copper deposition is practised worldwide. These additives absorb on the cathode surface and take part in the electrochemical crystallization process. However, these additives also affect the quality of the cathodes when they are inadequately controlled. Electrolyte additives used by Palabora are glue, thiourea, Avitone and chloride. Their effects were determined on cathode quality, the size of the current density region that gives the desired compact morphology, and current efficiency. This was done in a small-scale cell. Small cells have different hydrodynamics from industrial-scale cells, which makes it difficult to simulate the operation of industrial cells in a laboratory. The approach used here was to use a rotating cylinder cathode to attain controlled hydrodynamics. The rotation speed was chosen to give a diffusion layer thickness that is similar to that of an industrial-scale cell. It was shown that even fairly small changes in the additive levels can significantly affect the cathode morphology, and the current density range over which this morphology can be obtained.

Keywords : Copper; electrorefining; glue; thiourea; avitone and chloride.

        · text in English     · English ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License