Resumo

NAKHAEI, F.; CAMPBELL, Q.P.; LE ROUX, M.  e  BOTLHOKO, S.. Estimation of coal density using a 3D imaging system: RhoVol. J. S. Afr. Inst. Min. Metall. [online]. 2022, vol.122, n.8, pp.443-450. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2004/2022.

The results of coal sink and float tests are plotted as washability curves. Analysis of these curves indicates the most effective method by which the coal can be cleaned. Sink and float experiments are sampling-dependent, destructive, and use toxic chemicals. The present research introduces an alternative method based on a 3D imaging system called RhoVol, in which the density of individual particles is determined from mass and volume measurements. A quantitative error analysis was conducted on coal sample density measurements obtained by RhoVol, and the main factors influencing the errors identified and investigated. The results show that the drawback of this technique is related to its not being able to detect hidden concavities in the particle, resulting in an overestimation of particle volume. Furthermore, it is difficult to capture the impact of porosity and cracks on the volume of coal particles obtained from 3D silhouette images. This mismatch between the RhoVol data and sink and float test results has led to attempts to apply neural network (NN) and linear regression techniques to produce a fully reliable model for correction and estimation of coal density. The NN approach offers superior predictive capability over linear regression, and the estimated density distribution is in line with the sink and float analysis. The root mean square error in estimation of density using the NN model was less than 0.05 g/cm³.

Palavras-chave : coal; density; error; linear regression; neural network; RhoVol; sink and float; washability.

        · texto em Inglês     · Inglês ( pdf )