SciELO - Scientific Electronic Library Online

 
vol.61 índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

    Links relacionados

    • En proceso de indezaciónCitado por Google
    • En proceso de indezaciónSimilares en Google

    Compartir


    South African Journal of Chemistry

    versión On-line ISSN 1996-840Xversión impresa ISSN 0379-4350

    S.Afr.j.chem. (Online) vol.61  Durban  2008

     

    RESEARCH ARTICLE

     

    Degradation studies of β-cyclodextrin polyurethane polymers using soil burial experiments

     

     

    Bhekie B. Mamba*; Rui W. Krause; Tshepo J. Malefetse; Soraya P. Sithole

    Department of Chemical Technology, Doornfontein Campus, University of Johannesburg, P.O. Box 17011, Doornfontein, Johannesburg 2028, South Africa

     

     


    ABSTRACT

    Degradation studies of β-cyclodextrin polymers cross-linked with toluene-2,4-diisocyanate (TDI) and hexamethylene diisocyanate (HMDI) were carried out by exposing the polymers to different soil types for up to 120 days. The aim of the study was to determine the fate of these novel polymers in the environment. The polymers were either digested with sulphuric acid prior to performing a soil burial test or buried undigested. Results from the study indicate that the β-CD/TDI polymers with aromatic links underwent a greater mass loss during soil burial when first digested in sulphuric acid (ca. 50 % maximum mass loss). The β-CD/HMDI polymers, on the other hand, underwent the same mass loss for both the digested and undigested polymers (ca. 30 % maximum mass loss). Although the Fourier transform infrared (FTIR) spectroscopy data suggested no changes in the overall polymer structures, the scanning electron microscopy (SEM) micrographs revealed changes in the surface morphology of the polymers. Moreover, results of thermogravimetric analysis (TGA) point to polymer degradation under all conditions tested.

    Keywords: Degradation, cyclodextrin polyurethanes, scanning electron microscopy, soil burial test, microorganisms


     

     

    Full text available only in pdf format.

     

    Acknowledgements

    The authors wish to thank the University of Johannesburg, the Department of Science and Technology/National Research Foundation (DST/NRF) Africa scholarship programme, the Water Research Commission (WRC), Eskom's TESP programme and Rand Water for funding this work. Thanks also to Industrial Urethanes for kind donation of diisocyanates.

     

    References

    1 K. Sreenivan, Polym. Degrad. Stability, 1996, 53, 73-77.         [ Links ]

    2 S.D. Mhlanga, B.B. Mamba, R.W. Krause and T.J. Malefetse, J. Chem. Technol. Biotechnol., 2007, 82, 382-388.         [ Links ]

    3 B.B. Mamba, R.W. Krause, T.J. Malefetse, S.D. Mhlanga, S.P. Sithole, K.L. Salipira and E. Nxumalo, Water SA, 2007, 33, 223-228.         [ Links ]

    4 K.L. Salipira, B.B. Mamba, R.W. Krause, T.J. Malefetse and S.H. Durbach, Water SA, 2008, 32, 113-118        [ Links ]

    5 S.D. Mhlanga, Quantitative Analysis for the Removal of Natural Organic Matter and Degradation By-products from Water using Cyclodextrin Nanoporous Polymers. M. Tech. Dissertation, University of Johannesburg, Johannesburg, South Africa, 2006.         [ Links ]

    6 G. Davis, Materials Characterization, 2003, 51, 147-157.         [ Links ]

    7 R. Iovino, R. Zullo, M.A. Rao, L. Cassar and L. Gianfreda, Polym. Degrad. Stability, 2008, 93, 147-157.         [ Links ]

    8 S. Mitra, A. Ghanbari-Siahkali, P. Kingshott, H.K. Rehmeier, H. Abildgaard and K. Almdal, Polym. Degrad. Stability, 2006, 91, 69-80.         [ Links ]

    9 D. Akmal, M.N Azizan and M.I.A Majid, Polym. Degrad. Stability, 2003, 80, 513-518.         [ Links ]

    10 R. Chandra and R. Rustgi, Progr. Polym. Sci., 1998, 23, 1273-1335.         [ Links ]

    11 H. Santo, H. Furuhashi, D. Yang, H. Ohtani, S. Tsuge, M. Okada, K. Tsunoda and K. Aoi, Polym. Degrad. Stability, 2001, 73, 327-334.         [ Links ]

    12 M. Ratajska andS. Boryniec, React. Functional Polym., 1998, 38,35-49.         [ Links ]

    13 M. Sudhakar, A. Trishul, M. Doble, K.S. Kumar, S.S. Jahan, D. Inbakandan, R.R Viduthalai, V.R Umadevi, P.S. Murthy and R. Venkatesan, Polym. Degrad. Stability, 92, 2007, 1743-1752.         [ Links ]

    14 D. Li and M. Ma, Chemtech, 1999, 5, 32-37.         [ Links ]

    15 H.S. Kim, H.J. Kim, J.W. Lee and I.G. Choi, Polym. Degrad. Stability, 2006, 91, 1117-1127.         [ Links ]

    16 Abastari, T. Sakai, H. Sembokuya, M. Kubouchi and K. Tsuda, Polym. Degrad. Stability, 2006, 91, 2595-2604.         [ Links ]

    17 Abastari, T. Sakai, H. Sembokuya, M. Kubouchi and K. Tsuda, Polym. Degrad. Stability, 2007, 92, 379-388.         [ Links ]

    18 Y. Wang, W. Mo, H. Yao, Q. Wu, J. Chen and G. Chen, Polym. Degrad. Stability, 2004, 85, 815-821.         [ Links ]

     

     

    Received 12 October 2007
    Revised 25 September 2008
    Accepted 13 October 2008

     

     

    * To whom correspondence should be addressed. E-mail: bmamba@uj.ac.za